CALDO 500

ONSTRUCTION

High pressure die casting aluminum alloy radiator section. In the production of the sections, the original patented design from TIANRUN was applied, which eliminates the sub-slurry corrosion of the aluminum "POCKET" in the lower part of the section and calls to conduct the cesonic profile current of the radiator without dismantling from the out-of-plank system.

HERMETHICITY

The joint of the sections is carried into a single radia-TOP Using galvanized steel nipple. As a sealed gasket, sealing rings made of heat-resistant and chemical resistant silicone are used. This tech-pology allows you to achieve tightness and reliability in the event of a warm-and-expanded radiator during operation, as well as simplicity when regrouping sections of the device based on the customer's consumer notes.

THERMODYNAMIC

The ** CALDO 500 ** series radiators have optimal body output, which is accessible through the use of a high-quality aluminum alloy, the optimal geometries of the section body and the use of a technologically special letter.

PAINTING

The painting of the radiator sections is carried out-in several stages, which pre-show the preliminary mechanical and chemical preparation of the sectional surface for staining in an electronatic chamber using white powder enamel. The section-painting technology provides a complete color of the section, eliminates the thermal load on international gaskets and does not require additional painting of the ends of the sections when regrouping.

GUARANTEE

The warranty life of the radiator is not less than 10 years, provided that the original equipment is used and I observe the denini of the rules for the installation and operation of heating devices in accordance with the requirements of VVMS 2.04.05-91 and SNiP 3.05.01- 85 "Internal sanitary and technical systems"