PASSAT AL 500 SERIES

PASSAT ALOMINUM radiators

The AL 500 is pierced on the most modern-exchange equipment using washed over-HOUSE TECHNOLOGIES.

CONSTRUCTION

The design was based on the classic-the sky diza yn (even spun sections with 5th side ribs and 3rd convekation boxes in the upper part), as well as the classic 80 × 80 × 570 props.

The design of the aluminum cast section radiator is produced by the injection molding method of 7000- 15000 kN at a temperature of about 800 degrees C0, undergoes mechanical processing in the IITALIAN obo-ore; assembly, anodizing and painting on the latest German equipment, using high-strength intersecting gaskets.

Radiator sections are assembled using elongated high-strength

Hippels made by the method of COLD BOAT WITH IMPROVED “ZAHVA TOM UNDER KEY” (patent).

PAINTING

The radar painting has a two-layer enamel coating made of epock-sid polyester, made by the anaphoresis method. Enamel cover-Tye has an excellent address to the metal, has an increased mouth-PLEASE TO EXTERNAL IMPACT, and retains its personal color throughout its life-CII.

GUARANTEE

Warranty life of the radio-unit-not less than 10 l t, service life

-At least 30 years, subject to the introduction of ORIGINAL COMPLETE, observed the rules for the installation and operation of heating devices in accordance with the requirement of SNIP 2.04.05- 91 and SIP 3.05.01-85 "Internal sanitary and technical" systems.